commaimg (1.53) hardy; urgency=low * Further XHFC driver fixes * Improved BRI clock recovery control * Fix for Ticket #640, FXO line status detection problems -- Michael Walton Mon, 02 Aug 2010 12:22:39 +0200 commaimg (1.52) hardy; urgency=low * Add SLIC voltage reading to thermal command * Basics of T1 support (except EC) * Fix XHFCS RX FIFO overflows found in dense BRI configurations -- Michael Walton Tue, 06 Jul 2010 13:01:21 +0200 commaimg (1.51) hardy; urgency=low * Echo canceller v4, only change is bypass+HPF option * Support for above -- Michael Walton Wed, 14 Apr 2010 15:45:46 +0200 commaimg (1.50) hardy; urgency=low * TBR4 FPGA fix: synchronous E-bit insertion for count accuracy * Fix non-working discovery in pre-DHCP state -- Michael Walton Mon, 12 Apr 2010 15:43:47 +0200 commaimg (1.49) hardy; urgency=low * Automatic EC disable also on mISDN * Fix #522 TBR4: must send RAI but not E-bits for non-CRC equipment * New FPGA version 1.9 for TBR4 E-bits -- Michael Walton Thu, 01 Apr 2010 13:26:17 +0200 commaimg (1.48) intrepid; urgency=low * Oops re line status, don't use 1.47 -- Michael Walton Tue, 09 Feb 2010 09:53:21 +0200 commaimg (1.47) hardy; urgency=low * Fixed #401 (incorrect cards reported at startup) * Fixed #47 (Front panel LED shows green before init complete) * Ring validation and line status re #374 (FXO line status) -- Michael Walton Thu, 04 Feb 2010 11:52:33 +0200 commaimg (1.46) hardy; urgency=low * Fix invalid range for chan d... config * Change DAA (FXO) ring validation time, enabling CLI to work -- Michael Walton Wed, 20 Jan 2010 14:42:10 +0200 commaimg (1.45) hardy; urgency=low * Fixed E1 doubleframe mode incorrect RAI, Ticket #200 -- Michael Walton Mon, 14 Dec 2009 17:41:51 +0200 commaimg (1.44) hardy; urgency=low * Fixed comma-ls non response problem introduced in 1.43 * Support dummy timing span when no analog cards present -- Michael Walton Wed, 02 Dec 2009 15:25:11 +0200 commaimg (1.43) hardy; urgency=low * More E1 TBR-4 tweaks * Fixed Ticket #278: "Discovery causes clicks in audio" * Quicker boot time * In-band EC control, new stream option * FXO interrupt handler fix for 4-channel card -- Michael Walton Tue, 17 Nov 2009 14:29:57 +0200 commaimg (1.42) hardy; urgency=low * Bug fixes re: new card type support * E1 TBR-4 alarm changes -- Michael Walton Mon, 02 Nov 2009 16:00:10 +0200 commaimg (1.40) hardy; urgency=low * Support for new card types FXN (4 port FXO), FXR (4 port FXS), FXX (4 port FXO + 4 port FXS) * TBR4 defect / RAI processing for E1 PRI * Additional t1e1 diagnostics * Added yellow LED activation for t1e1 alarm -- Michael Walton Wed, 21 Oct 2009 14:00:34 +0200 commaimg (1.39) hardy; urgency=low * Minor superdog tweak for development console * Added reset|keep option to chan EC config, default is reset, keep will maintain coefficients across calls for FXS/FXO/BRI * Echo canceller NLP hangover improves perceived quality * Add t1e1 config option to switch JAT to RX path * FPGA firmware update fixes E1 frame recovery problems when spoof FAS words are present * FPGA firmware update fixes E1 transmit, was sending CRC-4 in Si even when in E1DF mode, now sends Si=1 -- Michael Walton Thu, 15 Oct 2009 08:00:10 +0200 commaimg (1.37) hardy; urgency=low * New factory image with superdog * Packaging improvements -- Michael Walton Thu, 03 Sep 2009 10:55:28 +0200 commaimg (1.35) hardy; urgency=low * Actually 1.34 was a dud, here are the real changes -- Michael Walton Tue, 18 Aug 2009 17:47:56 +0200 commaimg (1.34) hardy; urgency=low * Watchdog robustness tweaks * Prevent broadcast flood on TDMoE when no server found -- Michael Walton Tue, 18 Aug 2009 17:47:54 +0200 commaimg (1.33) hardy; urgency=low * SLIC loop testing * FXS interrupt validate in system test * Support non PRI models * Reduce ring current limit from 90mA to 70mA (Ticket #37) * Automatic 2 seconds ring timeout -- Michael Walton Tue, 23 Jun 2009 10:57:56 +0200 commaimg (1.32) hardy; urgency=low * Corrected FPGA update inventory issue * Prevent SLIC VBATL/dynamic cycling * Fans default to HIGH -- Michael Walton Thu, 04 Jun 2009 17:30:29 +0200 commaimg (1.30) hardy; urgency=low * Protect accesses to pio_write (e.g. power off) * Add log message and flicker when back panel switch pressed -- Michael Walton Thu, 04 Jun 2009 06:29:06 +0200 commaimg (1.29) hardy; urgency=low * E1 system timing support for PRI * Reset EC on start of call (BRI + analog) * Remote Update support * Self test diagnostics -- Comma Tue, 26 May 2009 13:29:31 +0200 commaimg (1.25) hardy; urgency=low * Added stream command to set/get span id per stream * Added proper Ethernet/UDP mode per stream * Fix broken FXS loop current/gain setting -- Comma Tue, 14 Apr 2009 11:59:31 +0200 commaimg (1.24) hardy; urgency=low * Changed EC auto-disable hangover from 10ms to 24ms. Fixes Ticket #92 * Test helper code changes * Add FXS loop current setting, default to 25mA (was 30mA) * Support clock recovery from Ethernet - not proven though -- Comma Tue, 14 Apr 2009 11:58:57 +0200 commaimg (1.23) hardy; urgency=low * Fix for Ticket #82 - BRI TBR3 don't stop T3 when going into state F8 * Fix for Ticket #83 - BRI TBR3 multipoint access collision retries * Fix for Ticket #84 - FXS power trip, increase HVIC power thresholds -- Michael Walton Wed, 25 Feb 2009 15:53:22 +0200 commaimg (1.22) hardy; urgency=low * Fix for Ticket #76, nasty BRI D-channel bug -- Michael Walton Tue, 17 Feb 2009 16:10:31 +0200 commaimg (1.21) gutsy; urgency=low * Oops, 1.20 was a dud -- Michael Walton Fri, 13 Feb 2009 15:45:15 +0200 commaimg (1.20) gutsy; urgency=low * Update for TUV testing: Fixed TBR-3 TC27058 failure (FCS reject) -- Michael Walton Fri, 13 Feb 2009 14:15:49 +0200 commaimg (1.19) gutsy; urgency=low * Updates for TUV testing: New th bri option for clock delay * BRI clock delay now 13 (was 14) -- Michael Walton Thu, 12 Feb 2009 14:32:18 +0200 commaimg (1.18) gutsy; urgency=low * Added EC non-linear-processor enable/disable -- Michael Walton Tue, 10 Feb 2009 15:43:39 +0200 commaimg (1.17) gutsy; urgency=low * T1/E1 now default to txclk=rclk * EMC test support: new command "app emc" * Set Gain for FXS & FXO * Fixed #37 FXS ring trip causes thermal alarm. Also added automatic recovery from thermal alarm after 30 seconds. * Implemented #51 FXS loop current interrupt on call end -- Michael Walton Fri, 06 Feb 2009 12:01:49 +0200 commaimg (1.14) gutsy; urgency=low * BRI sync and test enhancements -- Michael Walton Thu, 22 Jan 2009 13:12:50 +0200 commaimg (1.13-1) gutsy; urgency=low * Testing versioning -- Michael Walton Mon, 12 Jan 2009 12:19:27 +0200 commaimg (1.13) gutsy; urgency=low * Tag comma_1.13 from svn -- Michael Walton Mon, 12 Jan 2009 11:48:35 +0200 commaimg (1.0) unstable; urgency=low * Initial Release. -- Michael Walton Mon, 12 Jan 2009 11:26:05 +0200